Vacu-Boom (patent pending) is an ingeniously simple, yet amazingly effective solution to today's environmental concerns. For the first time ever, it is possible to achieve 100% capture and recovery of waste water runoff from washing operations, both indoors and outdoors, with a minimum of effort. With Vacu-Boom and the proper accessories, waste water can be completely captured and pumped directly to a suitable nearby point of discharge or to a mobile storage tank for transport and later discharge.

The Vacu-Boom has been designed, perfected and proven with extensive field testing under all operating conditions for over four years. It is made from the finest raw materials and carefully assembled and tested to the highest standards of quality. The Vacu-Boom system is designed for long life and ease of use. Setup time is minimal and portability is simple.

The Vacu-Boom consists of a flexible sidewall made with a special type of fabric backed closed cell foam material that will not absorb liquids. The sidewall is supported and reinforced with strong molded ABS plastic ribs. The bottom edges of the sidewall are designed to seal tightly against any hard surface as vaccuum is created inside the semi circular hollow tube. Port openings along the bottom edges (one side only) inhale waste water into the hollow boom to be conveyed by airflow through the tube to a wet vaccuum recovery tank. The basic boom mid section is 5 ft long and is open at both ends which allows it to be joined to other 5 ft sections to form operating lengths of up to 60 ft (longer custom lengths available). The sections can also be attached to end caps and center taps. Vacuum hoses from the wet vacuum recovery unit are connected to the end cap and center tap (40 ft or more length). All pieces are quickly and easily assembled and diassembled with snap on clips. For maximum convenience in transporting a disassembled Vacu-Boom, we recommend the specially designed tote bag.

Applications for the Vacu-Boom continue to be discovered. It can be used anywhere that recovery of water or contaminated water is essential. Recovery rate with recommended wet vacuum recovery units is up to 20 GPM. Known applications for Vacu-Boom include mobile washing operations, outdoor vehicle or equipment washing, indoor washing or spill containment, asbestos water jet removal operations, and recovery of spillage of hazardous materials compatible with the Vacu-Boom materials of construction.